Quick Contact

AS01 Series

Features and Functions

1. Pure sine wave AC output, strong capacity for different loads.

2. Advance CPU intelligent control mode.

3. PWM solar charge mode.

4. Protection for overload, short circuit, over-voltage, lightning protection, temperature compensation and over heating etc.

5. Multiple electrical protection, safe and reliable.

6. Integrated design, easy installation, LCD display and humanized operation mode.

The scope of application of solar energy system

This is a new type of PV system, designed to resolve the problem of power shortage for the families, companies and other places. It is mainly contain case, inverter, solar controller, breaker, fuse, spd and input/output terminal. It can use for light, radio, DVD, TV set, fans, freezer, computers, small hand-drill, and communication equipment. The AC system is widely used in the field of family houses, schools, hospitals, offices, etc.

Family House

Offices

Schools

Parameters & Specifications

Model

AS0110

AS0115

AS0120

Controller

Rated Voltage

24V

48V

48V

Rated Current

50A

50A

50A

Inverter

Input

DC22-30V

DC44-60V

DC44-60V

Output

Rated Load

1000W

1500W

2000W

Waveform

Pure sine wave

Frequency(Hz)

50±0.5

Voltage(VAC)

220±2%

Over Load Protection

25 seconds delay shutdown for 105~130% exceeded

Solar Panel

Rated Power

800W

1200W

1200W

 Rated Voltage

     36V

72V

72V

Battery

 Rated Capacity

600AH

800AH

800AH

Rated Voltage

24V

48V

48V

Inspection and Maintenance

The following inspection and maintenance test are recommended for the best performance of system:

1. Frequently inspect the solar panel, clean away the dust and so on.
2. When the system is in the non working state, remember to charge the battery to prevent the battery from discharged at least every three months. 
3. Tighten all the terminals. Inspect for loosen, broken or burnt wire connections. Be certain no loose strands of wire are touching other terminals.
4. Replace the battery in the system with a new one every 2 years.
5. The system should have an annual check for insulation resistance and ground resistance.

Electrical Safety and Cautions

Please read this operation manual carefully before equipment installation.

* When install the system, Pls pay more attention on the ‘+’ and ‘-‘ polarity.
* In order to save energy, turn off the inverter when you do not use the AC power.
* Don’t open the control part privately without any professional guide, because there are some high voltage components inside
* Children should not be allowed to touch this machine without any supervision of adults.
* Immediately cut off the battery switch or grid-power when there is fire caused by electrical reasons. Use the carbon dioxide fire extinguishers or dry sands to put out the fire rather than water, otherwise there is the risk of electric shock. When use the carbon dioxide fire extinguishers it is necessary to pay attention to the prevention of frostbite and asphyxiation. When install or replace the battery, please pay more attention to the polarity of the battery, otherwise the system may be damaged by wrong operation.

Packing Information

Model

OS-AS0110

OS-AS0115

OS-AS0120

Inverter and Controller Cabinet

Cabinet Size

60*60*120CM

Packing Size/CTN

62*62*132CM
(0.507m³)

G.W./CTN

78.5KGS

80.22KGS

85KGS

PCS/CTN

1

Solar Panel

Solar Panel Size

1580*808*40

Packing Size/CTN

161*84*11CM
(0.149 m³)

G.W./CTN

35KGS

PCS/CTN

2

Battery

Battery Size

48.3*17*24CM

52.2*24*22.3CM

52.2*24*22.3CM

Packing Size/CTN

50.6*19.5*28CM
(0.0276 m³)

54.5*26*27.5CM
(0.0389 m³)

54.5*26*27.5CM
(0.0389 m³)

G.W./CTN

44.5KGS

60KGS

60KGS

PCS/CTN

1